The KMY24 microwave sensor module is planned and constructed on the thought of Doppler result. When appropriately designed it radiates an unfavorable power microwave signal of around 2.45 GHz across the guided place.
When an object (focus on) that might be possibly a human being, is offered in the range of the released signal, the signals secure shown going back to the sensor module with a few disruption in accordance with the original frequency, this is exactly commonly identified as the Doppler shift.
Whenever this shown frequency shift is identified by the sensor, the in built circuitry promptly brings together the shown frequency with the available original frequency and delivers two individual frequencies across its stipulated outputs.
In accordance with the guidelines of Doppler result this frequency step shift could possibly be often positive or negative depending on whether the object in the sensor place was receding or contacting the sensor.
The feature of the KMY24 concludes here, as well as the outputs from the device now ought to be amplified by way of proper voltage amplifier configuration, as an illustration as a result of an differential opamp amplifier circuit etc.
Further more on the opamp output could possibly be correctly shut down with a relay level or a recorder or an alarm for distinguishing or figuring out the imagined limitations.
The characteristics of the IC KMY24 could be figured out provided below:
High sensitivity and recognition regardless if a somewhat smaller target approaches the zone.
Twin mixer circuitry for permitting directional movement detection of the target
High trustworthiness for acquiring fool proof information
Scanty power consumption turning it into absolutely well suited for battery operated purposes.
Minimal harmonic emission for lowered RF interference in the surroundings.
The following image displays the pinout particulars of the KMY 24 microwave sensor
KMY 24 Microwave Sensor pinout details
The following image delivers the breakdown limitations or the complete maximum voltage and current ratings that must definitely be related to the IC, these kinds of limitations ought not be exceeded, to be exact these kinds of needs to be maintained properly below the revealed values.
The two images proven below demonstrate the phase shift or the difference in the position of the reflected frequency in accordance with the original radiated frequency when the target is contacting (first image below), just in case the target is receding or getting back (the second diagram below)
KMY 24 Microwave Sensor frequency result when target is getting close to
KMY 24 Microwave Sensor frequency result when target is receding
Within the next (approaching) article we shall attempt to realize relating to the best way to use a microwave sensor as a result of an effective circuit.